Dongguan Dezhijian Nhựa Electronic Ltd
Thông tin chi tiết sản phẩm:
|Size:||Diameter:1.75/3.0(dia.1.75 /3.0 mm)||Print temperature:||230°C -270°C.|
|Filament Net Weight:||1kg/Spool||G.W.:||1.3KG|
|Color:||white to purple||Length:||385m|
|Advantages:||High strength,good toughness,stable in performance||Disadvantage:||Prone to cracking if cooled too quickly|
High Quality 3D Printer Filament PLA 1.75mm 3mm For White To Purple
Light Chnage Filament
1. The specification is 1.75 &3.0
2. The vacuum packing,The Net Weight 0.8 KG
3. Have ABS Light Change and PLA light Change.
4. Two COlors :White to Purple and White to Blue.
PLA Glow in The Dark 3d Printer Filament 1.75 / 3.0mm
2, Manner and packing: use vacuum package, the net weight1.0KG.
3, Foreign 3d printer supplies perfect support the PLA, PLA belong to biological materials, corn grain
refining, natural color can be solution, dose not affect the environment.
4, PLA material have hard, the strength and stiffness high
5, Surface light, smooth degree is very good.
6, Processing and no smell.
7, PLA print not curly and no edge warp.
8, Working temperature is low, 200°C -250°C.
9, Many color you can choose
10, Variable Temperature PLA print strips change color temperature is 31 degrees
11, Glow in The Dark Blue when filament in Dark ,can emit blue light,Glow in The Dark Green when Filament in Dark ,can emit Green light.
12, Fluorescence Color Under ultraviolet light emitting
1, Manner and packing: We use plastic tray, the net weight 1.0KG, we put desiccant in it, use
vacuum package, every Tray into a small box, and the each 8 small box into a master carton.
2, Plastic tray: diameter 160mm, axle hole32mm, overall height 90mm.the corresponding
2, Diameter 200mm, axle hole 56mm, overall height 70mm. the corresponding
Applicable models: Suitable for Markerbot, RepRap,Cubify and UP 3D Printer.
Products are ready-made goods:
Quality Control :
1, All of Our 3D Printer Filament are 100% virgin material, never use recycled material or regrind
material, and all had achieved the latest REACH certificate.
2, Before the mass production, our engineer always do the test to make sure that sure that each
batch of new raw materials must be printed by 3D printer.
3, The Laser diameter runs automatically to control the diameter of the filament and keeps it in a
right range of 1.75 / 3.0mm, and our engineer will adjust it immediately when it alarms to indicate
of wrong size, and this unqualified filament will be cut off and never use it.
4, We to keep the filaments dry, each roll of filament is packed in a vacuumed poly bag with a
desiccant inside of it.